Cable Jointing Kit

Cable Jointing Kit:

The cable joints are used to connect low, medium or high voltage cables. The joints provide electrical insulation as well as mechanical protection and strength. The electrical connection is made in various ways and can crimp, or use of mechanical connectors, soldering

Types of electrical joints and terminations (back to basics)

Electrical power cable terminations

The electrical cable termination is the physical and electrical connection of a cable end that connects to another cable, or to the terminal of the equipment. The cable terminations are often designed to enable the physical and electrical interconnecting of two cable ends, or a cable end and a terminal on the equipment. The electrical connection requirements relate to the voltage drop, current carrying capacity, compatibility of the materials, etc. The physical requirements related to environmental protection as well as mechanical security.

• Outdoor or indoor use
• Voltage
• Current
• Overhead, or underground
• Type of Connector on the equipment where the cable will be connected.

Electrical power cable joints: The cable joints are used to connect low, medium or high voltage cables. The type of cable joint sizes, shapes and configurations vary according to the voltage, structure, insulation and the number of cores of the cable to be jointed.

Types of electrical power cable joints

There are about four commonly used types of joints; these differ in the mechanical arrangement and where they are used. However, some manufacturers may provide custom designs to suit unique customer requirements.

• Straight through joints
• The branch which can be a T or Y joint
• Pot ends
• Indoor/Outdoor terminations

Straight Through joints

This is the most used type of a joint and is used to extend pieces of electrical cables. A typical joint is as shown in figure 2 below:

1. Riser
2. Earth continuity connection
3. C.J compound
4. Plastinet
5. Pouring gate
6. Core Insulation
7. PVC (NA) Tape
8. Ferrule
9. BOPP Tape two layers each half overlapped over the planet

Straight joints can be used for indoor, outdoor, submerged and underground cable jointing. In the cast resin-based cable joints, the polyurethane-based casting resins provide mechanical protection, electrical insulation and moisture imperviousness to the joint.

We are the super stockists of 3m m-seal make cable jointing kits.

3M Cable Jointing Kit https://www.smsystems-india.com/best-sellers-2019.html#3m-cable-jointing-kit is available in both heat shrink and cold shrink for indoor, outdoor and straight through joints. These cable jointings are available in all sizes and voltages ranges.

Product Details: Usage/ApplicationOutdoor,Indoor,Straight through cable JointOutdoor,Indoor,Straight through voltage TypeHigh VoltageTypeOutdoorBrand3MVoltage11KV,22KV,33KVCore Type3 Core, Single Core https://www.smsystems-india.com/best-sellers-2019.html#3m-cable-jointing-kit

Electrical and Electronics Instruments

https://www.smsystems-india.com/electrical-electronics-instruments.html

We are specialized in supplying a wide range of Electronic Instruments to our clients. Our range of these are sourced from the trusted dealers in the market who manufacture these using premium quality materials. These instruments are available in various specifications and can be customized based on the requirements of the clients. We offer various kinds of instruments like Megger – Diagnostic Insulation Tester, Megger – Low Resistance and Micro Ohm Meter, Megger – Transformer Turns Ratio Tester, Megger – Voltage Detector, Megger – Digital Clamp Meter, Megger – Earth Resistance Tester, etc. Our range is accessed by our clients at affordable prices in the market.https://www.smsystems-india.com/electrical-electronics-instruments.html

You may Buy from Weekooo